Caledonia YawlCaledonia yawl project: floor timbers part 2 March 8, 2016 Gwendal Leave a commentOn Sunday I was able to start cutting the floor timbers. I used a jigsaw. I would have loved to use a bandsaw but the jigsaw was perfectly adequate. 8 March 2016And a little more cutting on the top of the timbers this evening.
Caledonia YawlCaledonia yawl project: floor timbers February 29, 2016 Gwendal Leave a commentToday I started to scribe all the floor timber dimensions onto the Douglas fir stock that I had planed down to the right width several months ago.Scribing the floor timber at station 2 1/2 was the most challenging as I don’t have a station mold for that from which to trace so I had to pull it from the plans. I will have to wait regardless until the hull is turned over before I can fit it anyway.I was able to use the station molds for most floors. Except the floor at station 2.5 which needed to be pulled from the plans.