Tag Archives: copper rivets

caledonia yawl project: spar building part VII

Progress, progress, progress… it still feels too slow but at the same time it is nice to see things I thought about in advance come into play.

20210824_142125

I had the 6 gauge copper wire for several months and it is quite satisfying to see it work nicely with the home made roves.

20210824_142143

I also did the final shaping of the inside of the jaws with a half round file. In hindsight it would have been better to cut out a semi circle from the but of the spar before gluing and advancing the wedges a little too. But although it took a little more work I think it looks fine.

I finally applied the first coat of Epifanes clear varnish mixed with 50% brushing thinner so that it penetrates into the wood as much as possible.

20210824_172945

It is such a satisfying feeling to finally stop sanding and apply the finish to the wood. I did realize that I had not completed all the little thumb cleats that need to be added to the spars and will need to be varnished. So I started on that this afternoon. I’ll keep at it tomorrow morning so that the next coats also cover the cleats as well.