Caledonia yawl project: dressing the stern apron and stem

On Saturday my assistant and I went to the lumber yard to get one more 2×3 to rip for the bow apron lamination and a couple 2×4’s that may end up being used for the floor timbers.

it was suprizingly chilly saturday, we got rain, wind and hail.
  
my assistant is ready to help me separate the apron and stem from the mould.
  
pulling the stem lamination away from the apron after the epoxy has cured
  
a good look at the epoxy that squeezed out and will have to be cleaned or planed off
 

Leave a Reply